During the production process, its compressor is an important part of the entire equipment. It uses a brand new original compressor. The whole equipment has built-in safety protection, low noise, power saving and durability. You can
The advantage of having internal heat is its fast temperature rise and high efficiency. Another mode is the far-infrared electric heating device, that is, the electric heater is wrapped around the bottom and middle and lower parts of the reactor for heating. With a large heating area, fast and stable heating, uniform heat release, convenient temperature control,
The heating and cooling of the RTM molding mold can adopt the step constant temperature method. There are three stages. First, the heating process. The mold is heated with high-temperature heat-conducting oil. The resin is melted and stabilized for a period of time. under
The heat-conducting oil heating and drying process uses hot oil as the heat medium to heat and dry the sludge, drying the 70% -80% sludge that has undergone first-stage dehydration to a water content of 40%, and its thermal efficiency can reach 95%. Above, operation
Low temperature chiller for mechanical and electrical applications such as building materials, new material molding, molds, food and beverage blow molding, vacuum coating, low temperature impact testing of metal materials, electronics, electricity, low temperature experiments, alloy material processing, cold processing of molds and knives, etc.
For car manufacturers, heating and cooling thermostats need to know the following data: the reasonable temperature of the battery pack is 10-30 ° C, and the liquid cooling system may reach -30 ° C in low-temperature weather. There is a heating block in the interior to pre-heat before starting to play a thermal protection function. When the car
The oil temperature machine comes with an expansion tank, which has three main functions: oil replenishment, exhaust, and expansion of the heat-conducting oil after high temperature. During normal heating, the oil tank does not participate in the heating process. The heat-conducting oil is replenished into the pipe through the expansion tank. Circuit system, forced liquid circulation through high temperature pump,