Manufacturers supply electric heating thermal oil heaters , oil temperature control machines, mold rapid heating and cooling equipment and other thermostats on PVC film printing, laminating machines, packaging embossing machines, multi-roller laminating machines, XPS extruded sheet lines, continuous vulcanization Machine, composite material molding press, glass fiber reinforced plastic mold, PVC decorative floor and wallboard extruder, injection molding machine, lithium battery energy laminator, stainless steel reactor heating, photovoltaic equipment, animal and vegetable oil complete equipment temperature control, such as If necessary, please contact our factory. Nanjing Keluode Machinery Co., Ltd. produces electric heating heat-conducting oil heaters , oil temperature control machines, water circulation heaters, chiller thermostats, etc. Welcome to buy.
1. In the process of plastic bottle blowing, a stable mold temperature is also needed in order to make the bottle blowing smoother and reduce the failure rate. At this time, pay attention to the pressure. Generally, high pressure is required for bottle blowing.
2. In the die-casting work of aluminum alloy and magnesium alloy, the mold temperature is kept in a proper range, the mold will not overheat and reduce the sticky mold, and the production can be carried out continuously and steadily. At the same time, the dimensional accuracy and surface finish of the casting can be improved, and the shrinkage of the casting can be prevented. Better production of complex thin-walled castings. The mold temperature machine for die casting is generally oil type, and the temperature is high.
3． When supporting the temperature control of rubber machinery, kneader, internal mixer, extruder die, etc., it is also called temperature control device or temperature control system. In these production processes, electric heating oil heater provides stable oil temperature. Quickly increase the temperature, followed by the insulation process and the requirements of rapid cooling.
4． In the printing, dyeing, printing and packaging industry, the rollers are used as oil heaters when they are heated. At this time, a relatively large fuel tank capacity and a relatively large flow rate are generally required to meet the requirements of rapid heating and thermal insulation.
5. When heating the reactor or other jackets, depending on the temperature requirements during production, Cloud's equipment can quickly raise the oil temperature to the required range and maintain a stable temperature, set the startup time in advance, and the heating power can be Adjust as required to save energy.
Temperature control range
200 度或 300 水循环式 180 度或 98 度 Thermal oil 200 degrees or 300 water circulation type 180 degrees or 98 degrees
380V50HZ AC3 phase 380V50HZ
PID & plusmn; 1
7.5 or more
/ 扬程 Pump flow / head
M3 / H / M
10.5 / 30
Circulating oil piping
0.4 ＊ 1.2 1.3 * 0.4 * 1.2
0.45 ＊ 1.3 1.3 * 0.45 * 1.3
0.5 ＊ 1.3 1.77 * 0.5 * 1.3
0.5 ＊ 1.5 1.7 * 0.5 * 1.5
0.5 ＊ 1.5 2.1 * 0.5 * 1.5
Features of Klod Electric Heating Oil Heater, Oil Temperature Controller:
1. Air blowing, oil return and water return function (optional)
2.Return oil temperature indication table
3. Automatic exhaust function at startup, heating power switching function
4. Loop prevention
5. Instant cooling start function (optional)
6.Multi-point temperature control unit can be customized
7, oil pump horsepower and heating power can be customized
8.Electrical appliances adopt WEST, Yuanli Pump, TE, LG, Schneider, Siemens, etc.
The temperature control range of the cloud electric heating oil heater is: the heat oil can be heated to 300 degrees, and the water can be heated to 98 degrees or 180 degrees.
Previous: No more!
Next: No more!